Bradley Smoker TDB3108 installation manual Sprayheads Standard w/Neoprene Spray Ring Grommet

Installation TDB3108, WF3208 Terreon® 54" Circular

Sprayheads — Standard w/Neoprene Spray Ring Grommet

NOTE: Repair kit does not include sprayhead		2
grommet. Order as a separate item.	1		4	5
			3

9

		7
		10	8	6
Parts List
			Sprayhead		Repair Kit
			Assembly S05-054B		S45-051
Item	Part No.	Description		Qty
1	125-001DE	Neoprene Washer-Top	1		1
2	139-031	Sprayhead Manifold	1		—
3	124-001AL	Washer	3		4
4	160-211	Carriage Bolt	3		4
5	115-061	Sprayhead Top	1		—
6	116-008	Sprayhead Bottom	1		—
7	124-001AT	Washer	3		4
8	161-025	Nut	3		4
9	124-020D	Sprayhead Grommet - Semi-circle	1		—
10	125-001DF	Neoprene Washer-Bottom	1		1

Sprayhead Service Suggestions

Problem: Water splashes over the rim of the bowl.

Cause: Foreign matter has reduced the size of the sprayhead slots, causing greater pressure at the open slots.

Solution: Clean the sprayhead:

1.Disassemble the sprayhead and dislodge any dirt, lime build-up and foreign debris with a wire brush.

2.Sprayheads with rubber grommet spray rings may be cleaned by rubbing a coin over the grommet.

3.Throttle down the volume control (water spray should strike the bowl without splashing outside of the bowl).

Problem: Water flow diminishes from the sprayhead.

Cause: Strainer portion of the stop-strainer-check valve is plugged.

Solution: Remove and clean the strainer screen from the stop-strainer-check valve.

NOTE: The sprayhead shown above includes a perforated neopreme spray ring grommet that is self-cleaning. The water pressure flexes the spray holes which slows accumulation of foreign matter and tends to “break loose” any such deposits that may have accumulated.

Bradley Corporation • 215-1187 Rev. N; EN 06-915B 4/6/2007 25