Bradley Smoker TDB3108 installation manual Vernatherm Ajustment Instructions

Installation TDB3108, WF3208 Terreon® 54" Circular

Vernatherm Ajustment Instructions

	NOTE: The Vernatherm TMA valve is NOT factory preset. Upon installation, the temperature
	of this valve must be checked and adjusted to ensure delivery of a safe water temperature.
	Water in excess of 110°F (43°C) may cause scalding.
F	CHECK THE TEMPERATURE AND ADJUST IF NECESSARY (THE RANGE OF THE VALVE IS 95°F–115°F (35°C–43°C). TO ADJUST THE
	TEMPERATURE, FOLLOW THE PROCEDURE BELOW:

•LOOSEN TEMPERATURE LOCKING NUT WITH WRENCH.

•USING A BLADE SCREWDRIVER, TURN THE ADJUSTMENT STEM COUNTERCLOCKWISE TO INCREASE THE TEMPERATURE OR CLOCKWISE TO DECREASE THE TEMPERATURE (FIGURE 13).

•ONCE DESIRED TEMPERATURE IS REACHED, TIGHTEN NUT TO PREVENT TEMPERATURE CHANGE.

G CLEAN SPRAYHEAD IF NECESSARY. SEE PAGE 25 FOR SPRAYHEAD MAINTENANCE AND REPAIR PARTS. ADJUST THE VOLUME CONTROL VALVE, IF NECESSARY, TO CONTROL THE FLOW OF WATER.

H ATTACH PEDESTAL ACCESS PANEL WITH HARDWARE PROVIDED.

I ATTACH KICK PLATE TO PEDESTAL BASE WITH HARDWARE PROVIDED.

TEMPERATURE	TEMPERATURE
ADJUSTMENT	LOCKING
STEM	NUT

Figure 13

Bradley Corporation • 215-1187 Rev. N; EN 06-915B 4/6/2007 19