Bradley Smoker TDB3108 installation manual Shown

TDB3108, WF3208 Terreon® 54" Circular Installation

4a

Adaptive infrared assembly for A drain and O drain units without Tie Pipe option

A INSTALL HEMMED END (NOT SHARP END) OF SUPPORT TUBE WITH GASKET ONTO BOWL (SEE FIGURE 6).

B CONNECT 1/2" SUPPLY TUBING TO SPRAYHEAD WITH 3/8" NPT TO 1/2" TUBE CONNECTOR AND PLACE SPRAYHEAD ONTO SUPPORT TUBE. RUN THE TUBING DOWN THROUGH THE SUPPORT TUBE AND CONNECT TO VALVE TUBE CONNECTOR.

PLACE THE UPPER TIE BAR (NOTCHED AT BOTH CORNERS OF EACH END) ON TOP OF SPRAYHEAD. CONNECT THE LONGER TIE C ROD TO THE 4-1/4" TIE ROD USING THE COUPLING NUT WITH HEX HEAD SET SCREWS. RUN THE TIE ROD ASSEMBLY DOWN

THROUGH UPPER TIE BAR (SEE FIGURE 6 INSET) AND SECURE FROM UNDERNEATH THE BOWL USING LOWER TIE BAR (NO NOTCHES) AND HEX NUT WITH SOCKET HEAD SET SCREW.

TIE ROD PRE-PACK

S45-1336

I.R. MODULE ASSY.

S50-344

TIE BAR

SUPPORT TUBE (STD) S57-005

(JUV) S57-006

SUPPORT TUBE GASKET 125-011

PRE-PACK

S45-055

1/2" SUPPLY TUBE

PRE-PACK

S45-1466

PEDESTAL ASSY.

S17-242

Figure 6	VALVE ASSY.
	S50-369

	TIE ROD		COVER
PRE-PACK
ACTUATOR
MODULE
ASSY.
COUPLING
		NUT
SPRAYHEAD				TIE
				BAR
SUPPLY TUBE				TIE
				ROD

SECTION VIEW OF

A/O UNIT ASSEMBLY

COVER

107-099 (A)

107-179 (O)

NUT

SPRAYHEAD

S05-054

TIE ROD 176-008A

DRAIN

S45-273

TERREON® DEEP BOWL (ADA bowl shown, classic bowl is optional)

Part No. varies with color of bowl. Contact your local Bradley Rep. for assistance

ACCESS PANEL 186-1456

A/O

(A shown)

12 4/6/2007 Bradley Corporation • 215-1187 Rev. N; EN 06-915B