Kenwood KDC-PS909 Disc control features See page, Playing CDs, Playing other Disc mode

Disc control features (See page 7)

Playing CDs

Playing CDs:

Press the Á(EJECT) button to slide open the faceplate, showing the CD (insertion) slot. Holding the CD with the labeled side facing up, insert it in the slot. The faceplate will show the control panel, and the CD will start playing.

The ¢ indicator will light when a CD has been inserted.

Playing CDs Already Inserted:

Press the SRC button repeatedly until the CD mode is obtained. "CD" is displayed when the CD mode has been selected.

The CD will start playing.

Pausing and Restarting CD Play:

Press the 38 button to make the disc pause.

Press the same button again to start play again.

Eject:

Hold down the Á(EJECT) button for one second or more to stop CD play. The faceplate will slide to eject the CD.

Press the Á(EJECT) button to show the control panel.

2CAUTION

•Do not attempt to insert a CD into the slot if another one is already there.

•The unit can only play 12-cm (5-inch) CDs. If you insert an 8-cm (3-inch) CD, it will get stuck inside and can cause the unit to malfunction.

NOTE

•The sound will be temporarily muted whilst the faceplate is moving.

•The only buttons that will work during the eject state are the Á(EJECT), SRC and ATT buttons, as well as the volume control button.

•When you load a CD and eject it right away, the next time you try to insert the CD may not load. In such a situation, take the CD out for a moment and then reinsert it.

When the disc changer with the O-N selection switch is connected, set the switch to "O" position to operate the disc changer mode.

Playing other Disc mode

This function permits the connection of optional players and the playing of discs other than the loaded CD (in the current unit).

Playing Discs:

Press the SRC button repeatedly until the disc control mode is obtained.

The disc will start playing.

NOTE

The disc control mode will differ, depending on the unit that is connected.

Mode Display Examples

•"DISC"...when a disc changer is connected

•"DISC-1", "DISC-2"...when two disc changers are connected

Pausing and Restarting Disc Play:

Press the 38 button to make the disc pause.

Press the same button again to start play again.

NOTE

•When one disc has finished playing its last track, the next disc in the changer starts playing. When the last disc in the changer has finished, the player returns to the first disc and starts playing it.

•Disc #10 is displayed as "0".

— 19 —