Safety precautions
English
NOTE
•If you experience problems during installation, consult your Kenwood dealer.
•If the unit fails to operate properly, press the RESET button. When the faceplate is not visible, press “the
•Press the reset button if the CD auto changer is first controlled and operates incorrectly. The original operating condition will return.
BALANCED OUTPUT |
|
| |
| AUTO | DISP/ |
|
| AME | TEXT | NAME. S |
8V
PREOUT |
|
|
|
|
| EJECT | CLOSE |
|
|
|
|
|
| DIMMER | PWR OFF |
|
|
|
|
|
|
| |
|
|
|
|
|
| D.R.I.V.E. |
|
LOUD | SCAN | RDM | REP | D.SCN | M.RDM | MENU | DISC |
|
|
|
|
|
|
|
AUD
NF
•We strongly recommend the use of the Code Security function (see p.30) to prevent theft.
Cleaning the Unit
If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth.
2CAUTION
Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off.
The marking of products using lasers (Except for some areas)
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
Cleaning the CD Slot
As dust can accumulate in the CD slot, clean it occasionally. Your CDs can get scratched if you put them in a dusty CD slot.
Lens Fogging
Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer.
