Sound System
Press the button to select a new sound standard
value in TV.
The options are DK,I,M.
NOTE: This TV factory set to "I" UK sound. If changed to another setting whilst receiving a UK TV station this will result in loss of sound. Change back to "I" to restore the sound.
AUTO Tune
1.Press MENU button.
2.Press VOL+/- button and highlight the TUNING icon.
3.Press PROG - button and highlight AUTO TUNE.
4.Press VOL+ button to start the automatic tuning process.
5.After a few minutes the tuning will end and the first station stored will show on the TV screen.
6.Change channels by pressing the PROG+/PROG- buttons.
Notice: Only after finishing auto tune, channels
will be sorted. If you break the process during the auto tune period, channels will be searched and stored, however, the channel will not be sorted into their correct channel order.
Manual Tuning
1.Press Menu button.
2.Press Vol+ or - button repeatedly until the TUNER icon is highlighted.
3.Press the PROG- button and highlight Program and change the Channel number showing to the number that you wish to store or change the TV station showing by pressing Vol+/- button.
4.Press Prog - button repeatedly and highlight
MANUAL TUNE.
5.Start the manual tuning process by pressing the VOL+ or VOL- button.
6.When the desired TV station is showing press the MENU button to return the TV to its normal operation. The TV station will be automatically stored into the channel number that was previously inputted.
7.To store further channel repeat above steps but this time change the channel number in step 3 to your next desired stored channel number 2,3, etc.
Fine Tune
Press "VOL.+" /"
Prog. Sort
Press Vol+ to enter.
User can set the two channel numbers that want to swap in program 1 and program 2 ,select the
"swap" item, press Vol+ button to perform swapping.
SKIP
press the skip to enable or disable the current program being tuned by pressing Vol+ or Vol- buttons the choice are "on" and "off" .
Function menu
In the Function Menu, OSD languages and APS related options are displayed on the screen.
Menu Language
The Language is English and Chinese.
Txt Language(Option)
The teletext language is UK,East Euro,Greece,Cyrillic, Arabic.
Country (Option)
Select your location country: UK / Greece / Hungary/ Italy / Norway / Netherlands / portugal / Poland / Sweden / Slovenia / Slovakia / Turkey / Austria / Belgium / Switzerland / Czech / Germany / Denmark/ Spain / France / Finland.
Notice: Different countries will effect the sort process in AUTO TUNE.
Factory Reset (Option)
Press "VOL+" key to delete all previously stored program information.
PIP menu
The last Menu is PIP menu,you can select Mode, PIP
Mode
The choices are PIP and Off. Only bychoosing PIP, you can enter PIP
PIP
Press the button to change horizontal position.
PIP V-POS
Press the button to change vertical positon.
Note PIP (Picture In Picture) is used to display an external source such as HDMI/VGA/YPbPr box at same time as displaying the TV channel that you are watching.
- 10 -
