Preparation
Preparation
Thank you very much for your purchase of this
The power consumption of the display is approximately 60 watts, please use the power cord designated for the product. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be defeated.
The product should be installed on a flat surface to avoid tipping. Space should be maintained between the back of the product and the wall for proper ventilation. If you would like to mount the TV to the wall, please see "Preparing the LCD for Wall Mounting" below for additional information. Avoid installing the product in the kitchen, bathroom or other places with high humidity, dust or smoke so as to shorten the service life of the electronic components.
Please ensure the product is installed with the screen in landscape orientation. Any 900 clockwise or counterclockwise installation may induce poor ventilation and excessive component damage.
Preparing Your LCD TV For Wall Mounting
The HDTV can either be kept on the stand base or mounted to the wall for viewing. If you choose to mount the HDTV to the wall, please follow the instructions below .
To Remove The Stand Base:
1.Unplug all the cables and cords from your LCD TV.
2.Place the LCD TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the display. 3.Remove the screws on the back panel of the TV located near the bottom so that the base stand can be removed. (See the right figure)
4.Gently pull the stand away from the display by grasping firmly to the base.
5.Now the display can fit securely to a mount (sold separately) by utilizing the mounting holes in the back panel of the display (See the right figure). Please make sure to read the directions of your specific wall mount to properly hang the HDTV. Make sure the wall mount is rated to support at least 20 lbs.
Professional mounting kits and installation service are recommended.
