SLIK PM7000 Using the Material Stops, Transporting and Storing, Kit No. J-104, Kit No. J-210

Using the Material Stops

15.The roller supports have built-in flip stops that can be used for repetitive cuts or the same length. Simply flip the stops into the up position and adjust to the desired length. Figure 10.

Transporting and Storing

16.Before storing or transporting, make sure all attachments are secured. Collapse outrigger supports. And it is recommended that benchtop tools are removed.

17.To fold legs, lift up on one end of WorkCenter with handle and depress the leg-locking snap buttons. Pivot collapsing legs until the snap button engages to hold the leg in the closed postion. Repeat on the other end.

Kit No. J-104

Mounting Kit for Miter Saws and/or Other Power

Tools with an Inset Mounting Hole Pattern

Kit No. J-210

Mounting Kit for Miter Saws and/or Other Power Tools with 3-Hole Mounting Pattern

Comes with everything above and adds bracket (Part #J105) which connects both #3040 Offset Mounting Brackets.

Instructions

Secure Offset Mounting Brackets as shown above.

Note: Brackets can be used on the front or rear of the Machine Mounts.

To Order (if not included) Call: 1-800-624-2027

Using Your PM7000 as a Woodworking Center

Your PM7000 Miter Saw WorkCenter can be used with many benchtop tools such as table saws, belt/disc sanders, bench grinders, planers, bandsaws, scroll saws and more.

Figure 10

W

#3040

X

Y

Z

Parts List

#3040 Offset Mounting Bracket

W5/16"-18 X 3/4” Carriage Bolt X 5/16" Flat Washer

Y 5/16" Spring Type Lock Washer Z 5/16"-18 Hex Nut

7