Sling Media SB300-100 manual Attach Remote Control IR Cable

Step 4: attach REMOTE CONTROL IR CABLE

Connect the remote control IR cable to the IR jack on the Slingbox. Next, place a remote control IR cable head on the top or bottom of your A/V device so it points at its IR sensor.

Make sure that the head of the remote control IR cable extends out far enough over the front your A/V device to send a signal to it. You may want to affix the remote control IR cables using

the adhesive pads after you've determined their IR SENSOR SIDE VIEW correct positions.

TIP: The IR sensor is on the front of your A/V device. Some sensors are behind a dark, reddish plastic window. Others may be hidden behind the plastic on the front of the device. If you don't see the sensor, shine a flashlight on the front of the device and look for a small bulb similar to the one on the end of

the remote control IR cable. To control more than one device, you can use the multi-head remote control IR cable that came with your

Slingbox PRO-HD. You can use one or more IR heads per device as needed.

9