44 Appendix A: Remote Management of Your Interactive Whiteboard System 99-00881-20 A0
Set Commands
Command Result Response
(On-Screen)
set input vga1 Selects the VGA1 projector input Input = vga1
set input vga2 Selects the VGA2 projector input Input = vga2
set input composite Selects the composite projector input Input = composite
set input s-video Selects the S-video projector input Input = s-video
set brightness +xx
(xx is a value between -16 and 16) Increases the brightness by a value equal to xx Brightness = #
set brightness -xx
(xx is a value between -16 and 16) Decreases the brightness by a value equal to xx Brightness = #
set brightness =±xx
(xx is a value between -16 and 16) Sets the brightness to an exact value between
-16 and +16. The ± sign represents the value’s
positive or negative sign and xx represents
the numeric value.
Brightness = xx
set contrast +xx
(xx is a value between -16 and 16) Increases the contrast by a positive value
equal to xx Contrast = #
set contrast -xx
(xx is a value between -16 and 16) Decreases the contrast by a negative value
equal to xx Contrast = #
set contrast =±xx
(xx is a value between -16 and 16) Sets the contrast to an exact value between
-16 and +16. The ± sign represents the value’s
positive or negative sign and xx represents the
numeric value.
Contrast = xx
set volume+
(range 0–50) Increases the volume by a value of 1 Volume = #
set volume-
(range 0–50) Decreases the volume by a value of 1 Volume = #