Submenu setting Description
Startup Screen Sets the type of startup screen to SMART or User. The SMART
screen is the default SMART logo on a blue background. The User
screen uses the saved picture from the Capture User Startup Screen
function.
High Speed Fan Adjusts the speed of the projectorā€™s fan. Select High or Normal.
N O T E
Use the High setting when the projectorā€™s temperature is high or the
altitude is above 6000' (1800 m).
Projector Mode Adjusts the projection mode to Front,Ceiling,Rear or Rear Ceiling.
I M P OR T A N T
SMART recommends that you never change this setting from the
Ceiling projection mode.
Source Adjusts the input source to VGA-1,VGA-2,Composite,S-Video or
HDMI.

USB Control settings

This menu allows you to associate a video source with a USB receptacle on the ACP.
Submenu setting Description
USB1 Source Enables touch for the selected video source (VGA-1,VGA-2,HDMI
or Disabled) by associating the video source with the room computer
USB receptacle (USB1) on the ACP.
USB2 Source Enables touch for the selected video source (VGA-1,VGA-2,HDMI
or Disabled) by associating the video source with the laptop USB
receptacle (USB2) on the ACP.
T I P
These settings are only available for SMARTī€ƒUX60 projectors running DLP firmware version
1.0.0.4 or later.

Network settings

This menu allows you to use or not use Dynamic Host Control Protocol (DHCP) and to set the
network-related addresses and names when DHCP is not used.
A P P E N D I X A
Remotely managing your system through a network interface
73