SmartDisk Firewire CD-R/W manual Macintosh Users, SmartDisk FireWire CD-R/WUser Guide

Macintosh Users

Macintosh Users

To connect SmartDisk FireWire CD-R/W to your Macintosh:

1Connect one end of the FireWire cable to an open FireWire port on your Macintosh.

2Connect the other end of the cable to either one of the FireWire ports on the SmartDisk FireWire CD-R/W.

Do not force the connection as damage may occur to the connector Caution or the FireWire port.

Disconnecting SmartDisk FireWire CD-R/W from your Macintosh

Do not disconnect SmartDisk FireWire Portable CD-R/W while it is active (when the yellow light is flashing); your data may be lost or SmartDisk FireWire Porta- ble CD-R/W may be damaged. If there is no CD inside the drive, simply unplug the drive. If a CD is inside the drive, drag the CD icon to the trash to eject and remove the CD. Then unplug the drive.

You can also safely unplug SmartDisk FireWire CD-R/W by shutting

Tip down the computer. Remember to ensure the yellow light is off before disconnecting.

SmartDisk FireWire CD-R/W User Guide 15