SmartDisk Portable Hard Drive manual Mmddyy00

To copy all files from a camera or other supported device, follow the steps below.

1.Turn on FotoChute and connect the camera as described above.

2.Press the OK/Copy button to begin copying all data from the camera to the FotoChute hard drive. [Alternatively, you can highlight Backup from the Main Menu, and then press Select.]

When prompted on the display, press the OK/Copy button again to confirm, or press the Left button to cancel. During the data transfer the following display will indicate the transmission activity.

When the copy process is complete, you will hear a beep and the Main Menu will appear.

3.Return the Power Switch to the OFF position.

4.Disconnect the camera's USB cable from FotoChute.

A copy of your camera’s data will now be located in a new directory on the FotoChute hard drive. The directory will be named using the form

<DSKxxxxx>

where “xxxxx” is a 5-digit sequence number. The sequence number begins from 00000 on each new date. All folders created on the same date will be contained in a parent directory named based on the current date, using the form

<mmddyy00>

9