-29-
Appendix A: Console Mode When you forget the system password or the IP address for this product, you need to enter
the console mode to reset them.
Before invoking the console program, be sure to find a null modem cable and use it to
connect from this product’s COM port to your computer’s COM port. Then, execute a
terminal program, such as the Hyper Terminal of MS Windows 95. The connection
parameters should be set to 19200 8-N-1. Be sure to reboot the Barricade. When the M1
indicator starts flashing regularly, you can press the “Enter” key several times. There
should be some messages, and console prompt ">" appears in the terminal.
In the console mode, you may reset the IP address and the system password of this product.
Please remember to execute the SR command to save the changes you have made. For
example,
IP 192.168.123.254
PW admin
SR
Schematic diagram of null modem cable