-39-
C.2 MediaOne 1. Be sure you have a computer that is already set up to access MediaOne and that the
MAC address of the Ethernet adapter used in this computer is the one registered with
your ISP. Please use this computer and Ethernet adapter to perform the following
steps.
2. Connect the Ethernet adapter to any LAN port of the Barricade and connect the cable
modem to the WAN port of Barricade.
3. Power on the Barricade. After it is working, please run WINIPCFG in your Windows
platform and release and renew the IP address manually. This step ensures that your
PC obtains the correct TCP/IP setting from the newly configured Barricade.
4. Log in as system administrator and click "Primary Setup."
5. Configure the WAN type as "Dynamic IP Address."
6. Save the setting for "Primary Setup."
7. Click "Toolbox" and check the WAN's MAC Address.
8. Click "Clone MAC" button. It will copy the MAC address of the Ethernet adapter used
in your computer and change the WAN's MAC Address.
9. Reboot Barricade.
NOTE: You can restore the WAN's MAC Address by clicking the "Restore MAC" button.