Rev 05
Synergy MultiConnect (SMC)
The Synergy MultiConnect (SMC) shown here is a required option to use the
IMPORTANT: You must have the SMC device and Level 8.1.1 or higher software on your Intera system.
Additionally, Release 8.1.1 software requires a Synergy MultiConnect patch to enable this coil to be recognized by your system. Contact your Philips representative to receive this software patch. Software releases above 8.1.1 do not require the patch.
For more information on Synergy MultiConnect, please refer to Intera Release 8 Philips Application Guide/Volume 1 - Basics, Section 3.22.
The Synergy MultiConnect (SMC) is shown here with the HNC coil connector.
11
