TROUBLESHOOTING
1.Symptom
Power LED does not light after power on
Probable cause
Power outlet or power cord may be defective
Possible Solutions
. Check for loose connections.
.Check the power outlet by using it for another device.
.Replace the power cord.
2.Symptom
Link LED does not light after connection is made.
Probable Causes
Switch port, network card or cable may be defective.
Possible Solutions
.Check that the switch and attached device are both powered on.
.Be sure the network cable is connected to both devices
.Verify that Category 5 cable is used for 100Mbps connections and that the length of any cable does not exceed 100 meters (328 feet). Check the network card and cable connections for defects.
.Replace the defective card or cable if necessary.
