SMC Networks SMC2209USB/ETH manual Driver Verification Windows 98/Me/2000/XP, Windows XP

6 Driver Verification Windows 98/Me/2000/XP

Section 6.1 Windows 98/Me

Step 1: Right-click the My Computer icon on your desktop and click [Properties].

Step 2: Then go to the [Device Manager] tab and open the [Network adapters] section. You should see your SMC EZ Networking Compact 10/100 USB 2.0 Adapter in this menu. Highlight it and click [Properties].

Step 3: The Device Status shows that the "This device is working properly". If there are any error messages displayed here, you will need to click the SMC adapter and click [Remove]. Then reboot the machine and go through the installation process again.

Section 6.2 Windows 2000

Step 1: Right-click the My Computer icon on your desktop and click [Properties].

Step 2: Then go to the Hardware tab and click [Device Manager]. Open the [Network adapters] section. You should see your SMC EZ Networking Compact 10/100 USB 2.0 Adapter in this menu. Right-click your adapter and click [Properties].

Step 3: The Device Status shows that the "This device is working properly". If there are any error messages displayed here, you will need to right-click the SMC adapter and click [Uninstall]. Then reboot the machine and go through the installation process again.

Section 6.3 Windows XP

Step 1: Click [Start] and click [Control Panel]. Then click the [Performance and Maintenance] icon and select [System].

Step 2: Then go to the Hardware tab and click [Device Manager]. Open the [Network adapters] section. You should see your SMC EZ Networking Compact 10/100 USB 2.0 Adapter in this menu. Right-click the adapter and click [Properties].

Step 3: The Device Status shows that "This device is working properly". If there are any error messages displayed here, you will need to right-click the SMC adapter and click [Uninstall]. Then reboot the machine and go through the installation process again.