SMC Networks SMC2209USB/ETH manual 3 Windows 2000/XP

Section 5.3 Windows 2000/XP

Step 1: After you have inserted the SMC2209USB/ETH in your machine and turned it back on, the Operating System will automatically recognize the adapter and prompt you for the appropriate drivers. Click the [Next >] button to begin the installation.

Step 2: Insert the EZ Installation Wizard and Documentation CD and select the [Search for a suitable driver...] option. Then click [Next >].

Step 3: Clear all checkboxes except for [Specify a location]. Then click [Next >].

Step 4: You will then be prompted to enter the location of the drivers. This should be ?:\. (Note: The ? equals the letter of your CD-ROM drive. In most cases, this is D.) Then click [OK]. You can also click [Browse] and browse to the root directory of the CD for the drivers for further verification.

Step 5: The system should find the drivers. Click the [Next >] button to continue the installation.

(Note: If the system could not find the drivers, click the [< Back] button, and select the [Display a list of the known drivers...] option. Select [Network Adapters] from the list of devices, press [Have Disk] and once again browse to the location of the drivers)

Step 6: You have now completed the driver installation. Click [Finish] to initialize the adapter.