SMC Networks SMC2662W-AR manual Compliances, FCC Class B Certification

English

COMPLIANCES

FCC Class B Certification

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

1.This device may not cause harmful interference.

2.This device must accept any interference received, including interference that may cause undesired operation.

Warning! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the distance between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from the one which the receiver is connected to.

•Consult the dealer or an experienced radio/TV technician for help.

CE Mark Declaration of Conformance

This is to certify that this product complies with ISO/ IEC Guide 22 and EN45014. It conforms to the

following specifications:

EMC: EN55022(1988)/CISPR-22(1985) Class B

IEC 61000-4-2(2000) 4kVCD/8kVAD

IEC 61000-4-3(2000) 3V/m

IEC 61000-4-4(2000) 1kV- (power line)

IEC 61000-4-6(2000) 3Vrms

IEC 61000-4-11(2000) 3Vrms

This product complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE Mark accordingly.

English

25 26