SMC Networks SMC6624M manual You will then see the Commander’s Stacking Status screen

Configuring Advanced Features

Configuring Advanced Features

Stack Management

Using Any Stacked Switch To View the Status for All Switches with Stacking Enabled. This procedure displays the general status of all switches in the IP subnet (broadcast domain) that have stacking enabled.

1.Go to the console Main Menu for any switch configured for stacking and select:

9.Stacking ...

2.Stacking Status (All)

You will then see a Stacking Status screen similar to the following:

For status descriptions, see the table on page 9-47.

Figure 9-18. Example of Stacking Status for All Detected Switches Configured for Stacking

Viewing Commander Status. This procedure displays the Commander and stack configuration, plus information identifying each stack member.

To display the status for a Commander, go to the console Main Menu for the switch and select:

9.Stacking ...

1.Stacking Status (This Switch)

You will then see the Commander’s Stacking Status screen:

9-26