SMC Networks SMC6624M manual Using Save and Cancel in the Menu Interface, Cancelled

	Switch Memory and Configuration
	Using the Menu and Web Browser Interfaces To Implement Configuration Changes
N o t e	The only exception to this operation are two VLAN-related parameter changes
	that require a reboot—described under “Rebooting To Activate Configuration
	Changes” on page C-8.
	Using Save and Cancel in the Menu Interface
	For any configuration screen in the menu interface, the Save command:
	1. Implements the changes in the running-config file
	2. Saves your changes to the startup-config file
	If you decide not to save and implement the changes in the screen, select
	Cancel to discard them and continue switch operation with the curent opera-
	tion. For example, suppose you have made the changes shown below in the
	System Information screen:

To save and implement the changes for all parameters in this screen, press the

key, then press (for Save). To

cancel all changes,

press the	key,
then press	(for
Cancel)

	Figure 2-2. Example of Pending Configuration Changes that Can Be Saved or
	Cancelled
N o t e	If you reconfigure a parameter in the CLI and then go to the menu interface
	without executing a write memory command, those changes are stored only in
	the running configuration (even if you execute a Save operation in the menu
	interface). If you then execute a switch reboot command in the menu inter-

Switch Memory and Configuration

C-7