| TROUBLESHOOTING |
|
|
| Troubleshooting Chart |
|
|
Symptom | Action |
|
|
Management Problems |
|
|
|
Cannot connect using | • Be sure to have configured the Barricade with a |
the Web browser | valid IP address, subnet mask and default |
| gateway. |
| • Check that you have a valid network connection |
| to the Barricade and that the port you are using |
| has not been disabled. |
| • Check the network cabling between the |
| management station and the Barricade. |
|
|
Forgot or lost the | • Press the Reset button on the front panel |
password | (holding it down for at least five seconds) to |
| restore the factory defaults. |
|
|
Printer Server |
|
|
|
The printer cannot | • Make sure the parallel cable between the |
print or prints garbage | Barricade and printer is connected and is in good |
| condition |
|
|