Configuring Client TCP/IP
28
Manual IP Configuration
1. Follow steps 1-5 in “DHCP IP Configuration” on page 26.
2. Select “Use the following
IP Address.”
3. Enter an IP address based
on the default network
192.168.2.x (where x is
between 2 and 254), use
255.255.255.0 for the
subnet mask. and
the IP
address of the
Barricade™ Router
(default: 192.168.2.1) for
the Default gateway field.
4. Select “Use the following
DNS server addresses.”
5.
Enter the IP address for the Barricade™ Router in the Preferred
DNS server field
. This automatically relays DNS requests to
the DNS server(s) provided by your ISP. Otherwise, add a
specific
DNS server into the Alternate DNS Server field and
click OK to close the dialog boxes
.
6. Record the configured information in the following table.
7. Click OK to close the dialog box.
TCP/IP Configuration Setting
IP Address ____.____.____.____
Subnet Mask ____.____.____.____
Preferred DNS Server ____.____.____.____
Alternate DNS Server ____.____.____.____
Default Gateway ____.____.____.____