35
CONFIGURING THE
BARRICADE™ ROUTER
The Barricade™ Router can be configured by any Java-
supported browser including Internet Explorer 5.0 or above.
Using the Web management interface, you can configure the
Barricade™ Router and view statistics to monitor network
activity.
Note: Before you attempt to configure your router, if you have
access to the Internet please visit www.smc.com or
www.smc-europe.com and download the latest
firmware update to ensure your router is running the
latest firmware.
Before you attempt to log into the Barricade™ Router’s
Web-based Administration, please verify the following.
1. Your browser is configured properly (see below).
2. Disable any firewall or security software that may be running.
3. Confirm that you have a good link LED where your computer
is plugged into the Barricade™ Router. If you don’t have a link
light – then try another cable until you get a good link.

Browser Configuration

Confirm that your browser is configured for a direct connection to
the Internet using the Ethernet cable that is installed in the
computer. This is configured through the options/preference
section of your browser.