SMC Networks SMC7004WFW manual Attach the Wireless Barricade Plus to the Internet

INSTALLATION

Attach the Wireless Barricade Plus to the Internet

If Internet services are provided through an xDSL or cable modem, use unshielded or shielded twisted-pair Ethernet cable (Category 3 or greater) with RJ-45 plugs to connect the broadband modem directly to the WAN port on the Wireless Barricade Plus. Use either straight through or crossover cabling depending on the port type provided by the modem (see Appendix B).

RESET	WAN	1	2	3	9 V
					2 A MAX

DSL/Cable

Modem

ISP

(Primary)

Figure 2-5. Making WAN Connection

Note: When connecting to the WAN port, use 100-ohm Category 3,

4or 5 shielded or unshielded twisted-pair cable with RJ-45 connectors at both ends for all connections.

Connecting the Power Adapter

Plug the power adapter into the power socket on the Wireless Barricade Plus, and the other end into a power outlet. Check the indicator marked Power on the front panel to be sure it is on. If the Power indicator does not light up, refer to Troubleshooting in Appendix A.

2-10