SETTING TCP/IP TO WORK WITH THE WIRELESS BARRICADE PLUS
Windows 2000
1.Click the “Start” button and choose “Settings,” then click “Control Panel.”
2.Double click the “Network and
3.Select the TCP/IP line that has been assigned to your network card in the “Local Area Connection Properties” window.
4.Click the “Properties” button to set the TCP/IP protocol for the Wireless Barricade Plus.
5.You can dynamically assign TCP/IP address settings to a client, or you can manually configure a client with address settings to meet your specific network requirements. (Note that the default IP address of the Wireless Barricade Plus is 192.168.2.1.)
