| ADVANCED SETUP | |
|
| |
Parameter | Description |
|
|
| |
Idle Time (Minute) | Enter the maximum idle time for the Internet connection. |
|
| After this time has been exceeded the connection will be | |
| terminated. | |
ISP Name | Choose the ISP to whom this connection will apply. | |
|
|
|
ATM
Enter ATM (Asynchronous Transfer Mode) function parameters here.
Parameter | Description |
Protocol | • Disable: Disables the ATM mode. |
| • 1483 Bridging: Bridging is a standardized layer 2 |
| technology. It is typically used in corporate networks to |
| extend the physical reach of a single LAN segment and |
| increase the number of stations on a LAN without |
| compromising performance. Bridged data is encapsulated |
| using the RFC1483 protocol to enable data transport. |
IP Address | IP address of the ATM interface. |
Subnet Mask | Subnet mask of the ATM interface. |
Default Gateway Default gateway of the ATM interface.
VPI/VCI | Each connection must have a unique pair of VPI/VCI settings. |
