ADVANCED SETUP
Remote Management
By default, management access is only available to users on your local network. However, you can also manage the Barricade from a remote host by entering the IP address of a remote computer on this screen. Check the Enabled check box, and enter the IP address of the Host Address and click “APPLY”.
Note: If you check Enable and specify an IP address of 0.0.0.0, any remote host can manage the Barricade.
For remote management via WAN IP address you need to connect using port 8080. Simply enter WAN IP address followed by :8080, for example, 212.120.68.20:8080.
