C
ONFIGURING
THE
B
ARRICADE
4-6
If the parameters are correct, click “APPLY” to save these settings.
Your Barricade is now set up. Go to “Troubleshooting” on page A-1 if you
cannot make a connection to the Internet.
DHCP Parameters
Function Shows the DHCP function is enabled or disabled.
Default Gateway LAN IP address of the Barricade.
Subnet Mask The network subnet mask.
Name Server 1 Primary DNS server IP address.
Name Server 2 Alternate DNS server IP address.
Start IP Address Start IP address of DHCP assigned IP addresses.
Number of IP Number of IP addresses available for assignment by the
DHCP server.
Parameter Description