SMC Networks SMC8506T COMPLIANCES

COMPLIANCES

This equipment has been tested and found to comply with the limits for a Class A digital device

pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in commercial environment.

This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in

accordance with the instruction manual may cause harmfu l interference to radio communications. Its

operation in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

SMC contact for these products in Europe is:

SMC Networks Europe,

Edificio Conata II,

Calle Fructuós Gelabert 6-8, 2o, 4a,

08970 - Sant Joan Despí,

Barcelona, Spain.

This information technology equipment complies with the requirements of the Low Voltage Directive

73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE Mark accordingly. It conforms to

the following specifications:

EMC: EN55024 (1998)/CISPR-22 (1995) Class A

IEC 61000-4-2 (1995) 4 kV CD, 8 kV AD

IEC 61000-4-3 (1995) 3 V/m

IEC 61000-4-4 (1995) 1.0 kV - (power line)

0.5 kV - (signal line)

IEC 61000-4-5 (1995) 2 kV - (line to line)

1 kV - (line to ground)

IEC 61000-4-6 (1995) 3 Vrms

IEC 61000-4-11 (1995) Voltage dip >95% - 10 ms

30% - 500 ms

60% - 100 ms

Voltage interruption >95% - 5000 ms