SMC Networks SMC8926EM, SMC8950EM manual Warnings and Cautionary Messages, Environmental Statement

Models: SMC8926EM SMC8950EM

1 76
Download 76 pages 19.46 Kb
Page 10
Image 10
Warnings and Cautionary Messages

Stromkabel. Dies muss von dem Land, in dem es benutzt wird geprüft werden:

Schweiz

Dieser Stromstecker muß die SEV/ASE 1011Bestimmungen ein-

 

halten.

 

 

Europe

Das Netzkabel muß vom Typ HO3VVF3GO.75 (Mindestanforderung)

 

sein und die Aufschrift <HAR> oder <BASEC> tragen.

 

Der Netzstecker muß die Norm CEE 7/7 erfüllen (”SCHUKO”).

 

 

Warnings and Cautionary Messages

Warning: This product does not contain any serviceable user parts.

Warning: Installation and removal of the unit must be carried out by qualified personnel only.

Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground line to prevent electrical hazards.

Warning: This switch uses lasers to transmit signals over fiber optic cable. The lasers are compliant with the requirements of a Class 1 Laser Product and are inherently eye safe in normal operation. However, you should never look directly at a transmit port when it is powered on.

Caution: Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic discharge when handling this equipment.

Caution: Do not plug a phone jack connector in the RJ-45 port. This may damage this device. Les raccordeurs ne sont pas utilisé pour le système téléphonique!

Caution: Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards.

Environmental Statement

The manufacturer of this product endeavours to sustain an environmentally-friendly policy throughout the entire production process. This is achieved though the following means:

Adherence to national legislation and regulations on environmental production standards.

Conservation of operational resources.

Waste reduction and safe disposal of all harmful un-recyclable by-products.

Recycling of all reusable waste content.

Design of products to maximize recyclables at the end of the product’s life span.

Continual monitoring of safety standards.

End of Product Life Span

This product is manufactured in such a way as to allow for the recovery and disposal of all included electrical components once the product has reached the end of its life.

Manufacturing Materials

There are no hazardous nor ozone-depleting materials in this product.

vi

Page 10
Image 10
SMC Networks SMC8926EM, SMC8950EM manual Warnings and Cautionary Messages, Environmental Statement, End of Product Life Span