SMC Networks SMC9452TX-1 manual Windows 95/98/Me, Windows NT

Driver Verification

Windows 95/98/Me

Step 1: Right-click the My Computer icon on your desktop and click [Properties].

Step 2: Then go to the [Device Manager] tab and open the [Network adapters] section. You should see your SMC EZ Card 1000 in this menu. Highlight it and click [Properties].

Step 3: The Device Status shows that the "This device is working properly". If there is any error messages displayed here, you will need to click the SMC adapter and click [Remove]. Then reboot the machine and go through the installation process again.

Windows NT

Step 1: Right-click the [Network] icon on your desktop and click [Properties].

Step 2: Verify that the SMC9452TX-1 adapter is listed in the [Adapters] section.

Step 3: Click [Start], click [Run] and type "eventvwr". This will bring up the entire System Log in the Event Viewer. Make sure that there are no error messages regarding initializing the SMC adapter.

Step 4: Open your NT Diagnostics utility and make sure that the SMC adapter is listed. It will show up as "FASTNIC_".

24