Safety Compliance

Underwriters Laboratories Compliance State-

ment

Important!
Before making connections, make sure you have the
correct cord set. Check it (read the label on the cable) against the
following:

The unit automatically matches the connected input voltage.
Therefore, no additional adjustments are necessary when connecting it
to any input voltage within the range marked on the rear panel..
Operating Voltage Cord Set Specifications
120 Volts UL Listed/CSA Certified Cord Set
Minimum 18 AWG
Type SVT or SJT three conductor
cord
Maximum length of 15 feet
Parallel blade, grounding type
attachment plug rated 15 A, 125 V
240 Volts (Europe only) Cord Set with H05VV-F cord
having three conductors with
minimum diameter of 0.75 mm2
IEC-320 receptacle
Male plug rated 10 A, 250 V