SMC Networks SMCG55 manual Power Cord Set

France and Peru only

This unit cannot be powered from IT† supplies. If your supplies are of IT type, this unit must be powered by 230 V (2P+T) via an iso- lation transformer ratio 1:1, with the secondary connection point labelled Neutral, connected directly to earth (ground).

† Impédance à la terre

Power Cord Set

U.S.A. and

Canada

Denmark

Switzerland

U.K.

Europe

The cord set must be UL-approved and CSA certified.

The minimum specifications for the flexible cord are:

-No. 18 AWG - not longer than 2 meters, or 16 AWG.

-Type SV or SJ

-3-conductor

The cord set must have a rated current ca- pacity of at least 10 A.

The attachment plug must be an earth-grounding type with NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.

The supply plug must comply with Section 107-2-D1, Standard DK2-1a or DK2-5a.

The supply plug must comply with SEV/ ASE 1011.

The supply plug must comply with BS1363 (3-pin 13 A) and be fitted with a 5 A fuse which complies with BS1362.

The mains cord must be <HAR> or <BASEC> marked and be of type HO3VVF3GO.75 (minimum).

The supply plug must comply with CEE7/7 (“SCHUKO”).

The mains cord must be <HAR> or <BASEC> marked and be of type HO3VVF3GO.75 (minimum).

IEC-320 receptacle.