T
WISTED
-P
AIR
D
EVICES
4-3
3. As each connection is made, the green Link LED (on the TigerSwitch)
corresponding to each port will light to indicate that th e connection is
valid.
Wiring Closet Connections
Today, the punch-down block is an integral part of many of the newer
equipment racks. It is actually part of the patch panel. Instr uctions for
making connections in the wiring closet with this type of equipment
follow.
1. Attach one end of a patch cable to an available port on the switch, and
the other end to the patch panel.
2. If not already in place, attach one end of a cable segment to the back
of the patch panel where the punch-down block is located, and the
other end to a modular wall outlet.
3. Label the cables to simplify future troubleshooting.
Figure 4-2. Wiring Closet Connections
EquipmentRack
(sideview)
SMCTigerSwitch 10/100
PatchPanel
Punch-DownBlock
Wall
TigerSwitch10/100
6724L3