8.Turn off your computer.
9.Insert the EZ Connect™ N Wireless PCI Adapter in to an available PCI slot. IMPORTANT: For
correct installation of new hardware please refer to your Computer user manual. NOTE: To install the card you may be required to remove the attached antennas. This is done by pulling the antennas from the base.
10.Once the EZ Connect™ N Wireless PCI Adapter is inserted screw on the larger 5dBi antenna to the connector marked with a green sticker. If you had to remove the antennas in step 9 reconnect them now. The antennas push on (not screw on) to the remaining connectors.
11.Turn On your computer.
12.The “Found New Hardware Wizard” will appear. Click [No, not this time], then Next].
13.Click [Install the software automatically (Recommended)], then click [Next].
16