Transmission troubleshooting

F040: POP protocol DELE command error

F050: POP protocol TOP command error

F900: Network card I/F error

F910: TCP/IP or SMTP/POP not supported or allowed by network card

F920: Network card not ready; transmission request received while network card is initialising (redial)

F931: E-mail cannot be received (invalid TIFF)

F932: E-mail cannot be received (other than invalid TIFF)

F940: Memory full

F941: No new mail found in manual reception

F942: Command time-out

F950: Server communication error

F980: Aborted

Note:	For service codes F001 and F002, the number of pages in the
	report will be left blank.

Transmission fails; a communication error occurs.

•Are the IP ADDRESS, SubNetMask and Default Gateway settings correct?

•Has the SMTP server been configured correctly?

•Has the host name been registered?

•If using DNS, is the DNS server address correct?

•Check to make sure that the server is not down.

•If DNS is ON, some servers may cause an error.

When one-touch key is pressed with an email address assigned, a warning message appears on the LCD.

•Has an e-mail address been entered that has been assigned on this machine?

LCD shows message "OPTION BOARD ERROR".

•A network card I/F error has occurred - turn the power off and on again to recover.

Internet Fax

Oki ii manual Transmission troubleshooting