Oki ii manual Network scanner, Troubleshooting, Service codes

3.The DNS server replies to the mail server with the IP address of fax.abc.com.

4.The mail server forwards the message onto the Internet Fax.

5.The Internet Fax then forwards the message onto a G3/G4 fax machine with the telephone number of 123.

Network scanner

This fax machine can be used as a network scanner. Scanning is carried out as if sending an Internet Fax, but specifying the email address to which the scanned document should be sent. The recipient of the transmission, then receives the document on their PC as a TIFF file. Resolution of the TIFF file can be set to a maximum of 600 x 600 dpi in EX-FINE mode to create a high-quality scanned image file.

Note:	The resolution of the scanned image can be set between 300
	and 600 dpi through the user function 89:EX.FINE MODE.

When using this fax machine as a scanner, set 90:IFAX SENDER ID to OFF so that the sender ID will not be added at the top of the document.

Troubleshooting

Service codes

If a communication error occurs, check the service code shown on the Activity Report.

SMTP communications

The service code for a SMTP communication is prefixed with the letter E, followed by a three-digit SMTP error code defined by RFC. Error codes from E900 and above are codes defined specifically for this Internet Fax.

E001: Text print

E002: Text received but not printed

E900: Network Card I/F error

E910: TCP/IP or SMTP/POP not supported or allowed by network card

E920: Network card not ready; transmission request received while network card is initialising (redial)

E930: No match for domain received; invalid user name

Internet Fax 25