20 or numeric key 0. The symbols available are ! # & ' ( ) * + ,
-. / : ; = ? · @ ” _ % ~ . The "~" (tilde) symbol will appear on the LCD as
•1:IP ADDRESS - Sets the IP address.
•2:SUBNETMASK - Sets the subnet mask.
•3:DEFAULT GATEWAY - Sets the default gateway address.
•4:SMTP SERVER NAME - Either the IP address or the host name of the SMTP mail server up to 64 characters may be entered here. The host name (e.g. mail.network.com) can be used if DNS has been set; otherwise, enter the IP address of the server. The address must include the "." (period) dividers (e.g. 192.168.004.123).
•5:POP SERVER NAME - Either the IP address or the host name of the POP mail server up to 64 characters may be entered here. The host name (e.g., mail.network.com) can be used if DNS has been set; otherwise, enter the IP address of the server. The address must include the "." (period) dividers (e.g., 202.250.111.123).
•6:POP USER ID - Enter the user ID registered on the POP3 server, which must be alphanumerical characters no more than 16 characters long.
•7:POP PASSWORD - The password registered on the POP3 server may be entered, which must be alphanumerical characters no more than 16 characters long. If a password has already been registered, it will be shown as 16 Xs to ensure that it will remain protected.
Note: | 6:POP USER ID and 7:POP PASSWORD settings in the fax |
| machine must match the POP3 user name already entered in |
| the server |
•8:DNS P. SRV ADDRESS (Domain Name Service Primary Server) - Sets the IP address of the DNS primary server. This will not be required if the server is connected directly using its IP address.
•9:DNS S. SRV ADDRESS (Domain Name Service Secondary Server) - Sets the IP address of the DNS secondary server. Enter this setting only if a secondary server has been set up.
•10:HOST NAME - Enter the host name defined on this machine. Maximum length: 64 characters.
Internet Fax | 9 |
