9

TROUBLESHOOTING

Before calling the assistance service, check that the operations described below have been carried out correctly; this will save both time and money.

The machine does not work (indicator light off)

Make sure that:

1)The electricity supply has not been cut- off

2)The plug is inserted properly in the socket

3)The programmer knob has been pulled outwards or the start/stop button (if fitted) has been pressed (see using the washing machine)

4)The door is closed.

The machine does not fill with water Make sure that:

1)There is water in the mains supply

2)The feed valve is open

3)The fill hose is not kinked

4)With the machine unplugged from the mains, clean the inlet filter between the valve and the water fill hose.

The machine will not drain or spin Make sure that:

1)The drain hose is positioned correctly

2)The drain hose is not kinked

3)The detergent dose is correct and not excessive

4)The detergent drawer is not caked-up

5)The detergent is the correct one for use in washing machines.

The door will not open

Wait 3 minutes after the programme has finished.

The machine does not work (indicator light on)

Make sure that:

1)The programmer knob is set at the required programme

2)See problem “The machine does not fill with water".

I cannot see any water during the wash This is simply because the new technology used in these machines guarantees double the wash with half the water, this benefits the environment and you save energy.

I can see too much foam

Make sure that:

The detergent used is that designed for washing machines.

The machine vibrates or is noisy Make sure that:

1)Large items in the wash are not folded (sheets, tablecloths, etc.)

2)The washing machine is properly levelled

3)The four locking screws and spacers have been removed.

Does not dry (WASHER DRYER)

Make sure that:

1)The programme has been chosen correctly

2)The water tap is turned on

3)The discharge filter is clean

4)The washing load is right.

model

N ° 204276237

 

220 V

 

Hz

 

kg wash

heating wash

W

kg dry

 

heating dryer

W

5 / 100 N/cm 2

wash motor

W

 

 

A

 

spin motor

W

 

 

 

 

 

 

dryer motor

W

 

 

total

w

pump

W

Try the machine to see if the problem has been solved.

If the problem persists, call the technical assistance service, stating:

1)The type of malfunction

2)The model of the washing machine

3)The serial number of the machine reported on the rating plate fixed to the inside of the filter door.

service

GB

Page 10
Image 10
Smeg 633ST manual Troubleshooting