Instructions for the installer
The appliance is fitted with a terminal board at the rear for electrical connections (see following diagram). To access, remove the rear cover.
For operation on 400-415V3N∼: use an
H05RR-F-type five-core cable (5 x 2.5 mm2).
For operation on 400-415V2N∼: use an
H05RR-F-type four-core cable (4 x 4 mm2).
For operation on 230-240V∼: use an
H05RR-F-type three-core cable (3 x 6 mm2).
The cable end to be connected to the appliance must be provided with an ground wire
33