Manuals / Smeg / Kitchen Appliance / Oven

Smeg A42C Positioning and levelling of the appliance, Instructions for the installer

Models: A42C

1 29

Page 8

2.2 Positioning and levelling of the appliance

Instructions for the installer

Complete wiring up to power supply with an appropriately rated five-core plug (see data plate) or, in case of operation from a 230V∼ power supply, with a three-core plug. Make sure that plug and wall socket are of the same type and are in conformity with regulations in force. Make sure that the appliance is properly earthed. Before powering, check that the power line is properly earthed. Avoid using adapters or shunters.

The manufacturer declines all responsibility for damage to persons or things caused by non-observance of the above prescriptions or by interference with any part of the appliance.

2.2 Positioning and levelling of the appliance

Having carried out the electricity and gas hook-up, level the appliance using the four adjustable legs.

Page 8

Image 8

Smeg A42C instruction manual Positioning and levelling of the appliance, Instructions for the installer

Contents

CUCINA CON FORNI ELETTRICI COOKER WITH ELECTRIC OVENS COCINA CON HORNOS ELECTRICOSESPAÑOL ITALIANOENGLISH Contents 2. INSTALLATION OF THE APPLIANCE 3. DESCRIPTION OF CONTROLS6. AVAILABLE ACCESSORIES 7. COOKING HINTS 8. CLEANING AND MAINTENANCE 9. EXTRAORDINARY MAINTENANCEIntroduction 1. INSTRUCTIONS FOR SAFE AND PROPER USETHE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE NEVER UNPLUG BY PULLING ON THE CABLEIntroduction THE PLATE MUST NEVER BE REMOVEDInstructions for the installer 2. INSTALLATION OF THE APPLIANCE2.1 Electrical connection This rating plate must never be removedFor operation on 400-415V3N∼ use an H05RR-F-type five-core cable 5 x 2.5 mm2For operation on 400-415V2N∼ use an H05RR-F-type four-core cable 4 x 4 mm22.2 Positioning and levelling of the appliance Instructions for the installerDESCRIPTION OF SYMBOLS Instructions for the user3. DESCRIPTION OF CONTROLS 3.1 Front control panelDouble heating MAIN OVEN THERMOSTAT KNOBInstructions for the user 50 ⎟ 250 CAUXILIARY OVEN THERMOSTAT KNOB Instructions for the user3.2.1 Clock adjustment 3.2 Electronic ProgrammerLIST OF FUNCTIONS 3.2.2 Semiautomatic cooking3.2.5 Adjusting alarm volume 3.2.3 Automatic cookingthe end of cooking time press the key 3.2.4 End of cooking3.2.6 Switching off the alarm 3.2.8 Cancellation of set data3.2.7 Minute Counter After set-up, to see the remaining time, press the keyInstructions for the user 4. USE OF THE COOKING HOB4.1 Cooking zones Instructions for the user 4.2 Cooking tipsMake sure that children never touch the cooking hob Instructions for the user 5.1 Warnings and general advice5. USE OF THE OVENS 6. AVAILABLE ACCESSORIES Accessories on RequestThe auxiliary oven has 2 support Instructions for the userFUNCTION SWITCH THERMOSTAT SELECTOR SWITCH FROM 50 TO 250C 7. COOKING HINTS7.1 Hot-air cooking Keep the oven door closed during cookingTHERMOSTAT SWITCH IN POSITION 7.2 Hot-air grilling7.3 Grill cooking FUNCTION SWITCH THERMOSTAT SELECTOR SWITCH FROM 50 TO 250CTHERMOSTAT SELECTOR SWITCH FROM 50 TO 250C 7.4 Defrosting7.5 Traditional cooking THERMOSTAT IN POSITIONFUNCTION SWITCH VARIABLE GRILL CHOICE BETWEEN MIN. AND MAX 7.6 Delicate cooking7.7 Variable grill cooking THERMOSTAT SWITCH IN POSITIONInstructions for the user FUNCTION SWITCH7.8 Spit cooking 8. CLEANING AND MAINTENANCE 8.1 Cleaning the glazed ceramic hob8.2 Cleaning stainless steel Before any intervention, disconnect the power supply of the device8.3 Cleaning the inside of the oven 8.3.1 Self-cleaning liners8.3.2 Using the self-cleaning liners 8.3.3 Looking after the self-cleaning liners8.4 Door glass Instructions for the user9. EXTRAORDINARY MAINTENANCE 9.1 Replacement of light bulbsOnly use oven bulbs T 300C Instructions for the userInstructions for the user 9.2 Dismantling of the doors9.3 Oven door gaskets Cod. 914771729/A