Smeg ALFA135V6 manual Instructions for the User, Press START to display the cooking temperature

Instructions for the User

To edit a humidified fan-mode program by entering the parameters exactly as required, turn the knob to one of the programs from P1 to P14.

The display shows the parameters contained in the selected program. Hold down STOP for 2 seconds.

A beeper sounds to indicate that the editing mode has been accessed, and the message Ut°C appears on the display.

Press START to display the cooking temperature.

Press START or keep it pressed to increase the cooking temperature; each time START is pressed the temperature increments by 1°C (from 50° to 300°), or hold START down for increments of 5°C. (N.B. humidification cycles [U Ht] can only be edited if Ut°C is set at a temperature above 150°C).

Press STOP to move on to displaying the next parameter The display shows U Ct.

Press START to display the cooking time.

Press START or keep it pressed to increase the cooking time (from 1 min. to 99 min.).

Press STOP to move on to displaying the next parameter The display shows U Ht only if Ut°C is set > 150°C Press START to display the humidification cycles.

Press START or keep it pressed to increase the number of humidification cycles (from 0 to 6 cycles where 0 means conventional fan-mode cooking without the aid of humidification).

30