Instructions for the User
4.USING THE OVEN
4.1Precautions and General Advice
When the oven is used for the first time, it should
be heated to the maximum temperature for long enough to burn off any oily residues left by the manufacturing process.
If you have to carry out any procedures on foods, leave the door open for as short a time as possible to ensure the temperature inside the oven does not drop far enough to impair cooking results.
To avoid unpleasant contact with any steam inside the oven, open the door in two stages: hold it
4.2 Inside lights
The inside lights are turned on by turning the thermostat knob.
4.3 Setting the time
At first use, or after a power supply failure, the current time has to be set.
The 
symbol will flash on the display.
To set the current time, hold down START + STOP together until the display stops flashing.
Now press or hold down START to increment the hour display. Once the current hour has been set, press STOP to set the minutes and increment them as before by pressing the START button.
When the correct time is set, press the STOP button and the display will stop flashing.
4.4 Setting the power
After having set the time as described above and pressed the STOP button to confirm the setting, the display will show P8.3 (maximum power absorption 8.3 kW) if the oven is connected to a
Press START repeatedly to scroll through the power absorption settings available:
P8.3, P5.5 or P3.0 for
P5.5 or P3.0 for
After selecting the appropriate power, press STOP to confirm the setting.
N.B. This power setting operation only has to be carried out the first time the oven is connected. The value set is saved and automatically used whenever the oven is switched on after this. To modify this setting or the
28
