Manuals / Smeg / Kitchen Appliance / Dishwasher

Smeg APL12-1 manual User instructions, Technical Data, Width, Capacity, Water supply pressure

Models: APL12-1

1 36

Page 35

User instructions

TECHNICAL DATA

Width		597 ⎟ 599 mm

Depth measured flush with the		Free standing: 600 mm
outer edge of the control panel		Semi-integrated: 590 mm - Fully integrated: 570 mm

Height (depending on models)		Free standing: from 850 mm to 870 mm
		from 890 mm to 910 mm
		Semi-integrated and fully integrated: from 820 mm to 870 mm
		from 860 mm to 910 mm

Capacity		12 Standard place settings

Water supply pressure		min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)

Electrical characteristics		See rating plate

Page 35

Image 35

Smeg APL12-1 manual User instructions, Technical Data, Width, Capacity, Water supply pressure, Electrical characteristics

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS INSTRUCTION MANUALContents SELECTED PROGRAM INDICATOR LIGHTS User instructions1. Description of the controls SETTING THE WASHING PROGRAM AND SWITCHING ONUser instructions After using the table to identify the most appropriate washing programTABLE FOR CERTIFICATION BODIES HALF LOAD WASH SETTING certain models onlyUser instructions 1.2 Washing programsDELAYED START certain models only CANCELLING THE CURRENT PROGRAMUser instructions CHANGING THE PROGRAMWATER HARDNESS TABLE ADJUSTING THE WATER SOFTENING SYSTEMUser instructions END OF CYCLE User instructionsTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENTUser instructions 2. TroubleshootingFAULT Safety levelDESCRIPTION FAULTUser instructions E7 E8 E9WARNINGS AND RECOMMENDATIONS, GUIDE FOR THE USE OF BASKETS AND FOR CLEANING DISHWASHERSINSTRUCTION MANUAL Contents NEVER BE REMOVED Safety instructions1. Safety and operating instructions USES OTHER THAN THOSE DESCRIBED ABOVESafety instructions APPLIANCE Safety instructionsAQUASTOP MODELS generated Installation instructions2. Installation and hook-up 2.1 Water supply connectionDRAIN CONNECTION Installation instructionsCONNECTING TO THE WATER SUPPLY 2.2 Electrical connectionUser instructions 3. Operating instructions3.1 Using the water softening system User instructions 3.2 Using the rinse aid and detergent dispensersADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTINGUser instructions During the washing cycle, the dispenser will be opened automatically User instructionsADDING THE DETERGENT 3/1 Products User instructionsMAKE SURE that the items being washed are dishwasher-safe User instructions3.3 General warnings and recommendations Correct loading of the dishes helps ensure optimal washing resultsDishes and objects in copper, tin, zinc or brass these tend to stain User instructionsItems which are not dishwasher-safe LOWER BASKET 3.4 Using the basketsUser instructions EN 50242 STANDARD LOADS FOR CERTIFICATION BODIESLOADING THE LOWER BASKET User instructionsLOWER BASKET CUTLERY BASKET User instructionsUPPER BASKET User instructionsfor AAA models only see energy label User instructionsLOADING THE UPPER BASKET Loading examples ½ LOAD certain models only ½ LOADPush-button version ADJUSTING THE UPPER BASKETUser instructions Pull-out versionUser instructions 4. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER CLEANING THE SPRAY ARMSPROLONGED DISUSE CLEANING THE FILTER UNITGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE User instructionsBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE TROUBLESHOOTING MINOR PROBLEMSIf the dishes are not being cleaned properly, check that User instructionsIf there are visible traces of rust inside the tank User instructionsIf the dishes fail to dry or remain dull, check that If the dishes show signs of streaking, staining, etc., check thatWidth TECHNICAL DATAElectrical characteristics User instructionsPlaatsing van de deurhaken voor de modellen met display Sx Sx