Installation instructions

2. Installation and hook-up

Remove the polystyrene basket retainers. Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance. To ensure stability, install integrated or built-under dishwashers only under continuous worktops, and screw them to the adjacent units. To facilitate the installation procedure, the intake and drain hoses can be positioned in any direction; make sure that the hoses are not kinked, crushed or pulled too tightly. Make sure to tighten the locking ring-nut once the pipes have been placed in the direction required. A hole at least 8 cm in diameter is required to allow the power supply cable and pipes to pass.

Level the appliance on the floor using its adjustable feet. This operation is essential for ensuring correct operation of the dishwasher.

Installing a hob on top of a free-standing dishwasher is absolutely forbidden. Building-in a dishwasher underneath a ceramic hob is absolutely forbidden.

A dishwasher can be built-in underneath a conventional hob provided there is no break in the kitchen worktop, and the dishwasher and hob are installed and secured correctly, so that no hazards are

generated.

For free-standing models only: if the appliance is not built-in and is therefore accessible on one side, the door hinge area must be covered for safety reasons (injury hazard).

The covering fixtures are available as an accessory from specialist dealers or the After-Sales Service.

Some models are equipped with only one adjustable foot at the rear, which can be adjusted by turning the screw on the lower front part of the appliance.

2.1 Water supply connection

Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance.

The dishwasher must always be connected to the water system with new hoses; old or used hoses must never be reused.



Page 15 Page 17
Page 16
Image 16
Smeg APL12-1 manual Installation and hook-up, Water supply connection
Page 15 Page 17

APL12-1 specifications

The Smeg APL12-1 is a standout kitchen appliance that seamlessly combines functionality with striking design, epitomizing the brand’s commitment to elegance and innovation. This model is an under-counter dishwasher that not only occupies minimal space but also delivers exceptional cleaning power. It has been meticulously designed to cater to the needs of modern households while ensuring efficient water and energy consumption.

One of the primary features of the Smeg APL12-1 is its large capacity, holding up to 12 place settings. This makes it an excellent choice for families or those who enjoy entertaining guests, as it can accommodate a significant number of dishes, cutlery, and glassware in a single cycle. The interior of the dishwasher is intelligently designed with adjustable racks and foldable tines, providing versatility for larger pots or awkwardly shaped items.

The Smeg APL12-1 is equipped with a variety of wash programs, allowing users to select the cycle that best suits their washing needs. From intensive washes for heavily soiled items to eco-friendly programs that minimize water and energy usage, this dishwasher emphasizes customization and efficiency. The eco-wash option is particularly noteworthy, as it uses lower temperatures and reduced cycle times without compromising on cleaning effectiveness.

Another hallmark of Smeg’s brand philosophy is its focus on innovation through technology. The APL12-1 features advanced noise reduction technology, ensuring quiet operation which makes it suitable for open-plan living spaces. It operates at a noise level of just 49 dB, allowing users to run the dishwasher at any time without disruption.

The design language of the Smeg APL12-1 reflects the brand's classic Italian aesthetic, with a stylish finish that can enhance any kitchen decor. The unit comes in various colors, allowing homeowners to select a model that best matches their personal style. Additionally, a user-friendly control panel simplifies operation, making it easy to select wash cycles or check the status of the wash.

Energy efficiency is another significant aspect of the Smeg APL12-1, as it is rated with high energy efficiency class, leading to lower electricity bills and a smaller environmental footprint. This makes it a responsible choice for eco-conscious consumers who seek both style and sustainability in their kitchen appliances.

In summary, the Smeg APL12-1 is a powerful, stylish dishwasher that combines a diverse range of features with advanced technology. Its capacity, efficiency, and elegant design position it as an essential tool for any contemporary kitchen, ensuring that dishes come out sparkling clean with minimal hassle.
Top Page Image Contents