Smeg BLV1RO instruction manual End Of Cycle, Removing The Dishes, User instructions

User instructions

If the door has to be opened while washing is in progress, the program will be interrupted. The relative light will keep flashing and a beeper will signal that the cycle has not been completed. You must wait about 1 minute before closing the door to restart the program. When the door is closed the program will continue from where it was interrupted. This operation should only be carried out if strictly necessary, because it might cause problems in execution of the program.

END OF CYCLE

At the end of the program the beeper sounds briefly and the lights of programs 4 and 5 flash.

To switch off the dishwasher, open the door and press the ON/OFF button (1).

2 3 4 5 11 10 7 6 9 8 13 12 1

end

Auto 60°-70°

3/1

REMOVING THE DISHES

At the end of the washing program, wait at least 20 minutes before removing the dishes, to allow them to cool down. To prevent any water droplets on the upper basket from falling on the dishes in the lower basket, it is advisable to unload the lower basket first, and then the upper basket.

24