Instructions for the User

5. DESCRIPTION OF FRONT PANEL CONTROLS

All the cooker's control and monitoring devices are placed together on the front panel. The table below provides the key to the symbols used.

FRONT RIGHT-HAND BURNER

CENTRAL BURNER

REAR RIGHT-HAND BURNER

GAS OVEN THERMOSTAT

REAR LEFT-HAND BURNER

ELECTRIC OVEN THERMOSTAT

FRONT LEFT-HAND BURNER

ELECTRIC OVEN FUNCTION KNOB

REAR CENTRAL BURNER

BURNER IGNITION BUTTON

FRONT CENTRAL BURNER

OVEN LIGHT SWITCH

If the cooker is equipped with an electronic programmer, before using the oven check that the symbol appears on the display; see point “8.1 Setting the time".

BURNER IGNITION BUTTON (ON SOME MODELS ONLY)

On models fitted with this button, to light the flame, turn the burner ignition knob anti-clockwise to the minimum flame symbol while

pressing it down. To adjust the flame, turn the knob to the zone between the maximum and the minimum settings. To turn off the burner, turn the knob to the position.

HOB BURNER CONTROL KNOB

On models without burner ignition button, to light the flame press down the knob and turn it anti-clockwise to the minimum flame setting . To adjust the flame, turn the knob to the zone between the maximum and the minimum settings. To turn off the burner, turn the knob to the position.

GAS OVEN THERMOSTAT AND GRILL ELEMENT KNOB

(ON SOME MODELS ONLY)

This knob turns on the gas supply to light the burner inside the oven, or operates the grill/rotisserie function. The gas oven cooking temperature is set by turning the knob anti-clockwise to the value required, between Min. and

275°C.

For instructions for lighting the gas oven, refer to point “7.2 Using the gas oven”.

17

Page 15
Image 15
Smeg CB61VES manual Description of Front Panel Controls, HOB Burner Control Knob, 275C