Instructions for the Installer

2.4.4Bottled gas connection

Use a pressure regulator complaint with the relevant standards and make the connection to the gas cylinder in accordance with the relevant regulations.

Make sure that the gas supply pressure is as stated in the table in point "3.2/3.3 Burner and Nozzle Data Tables".

Screw the small hose connector F onto the large hose connector A and connect the resulting unit to the gas union B (or use the hose connector G for connection straight to the gas union B) and fit the seal C. Fit the ends of the rubber hose H onto the hose connector A+F (or G) and to

the outlet union of the pressure reducer on the gas cylinder. Fix the end of the hose H to the hose connector A+F (or G) using the regulation hose clamp I .

The hose connector G shown is not supplied with the appliance. Use only hose connectors compliant with the relevant regulations.

2.4.5Connection with steel hose (for all types of gas)

This type of connection can be made on both built-in and free-standing appliances. Use only regulation steel hoses no more than 2 metres long. Screw the end of the hose L , fitting the seal C, onto the gas union B with external ½" gas thread (ISO 228-1).

When installation is complete, check for any leaks with a soapy solution, never with a naked light.

9

Page 7
Image 7
Smeg CB61VES manual Bottled gas connection, Connection with steel hose for all types of gas